Why My Roller Skate Wheels Not Spinning Fast? (What is The Solution?)

spinning

Are you ever annoyed that your roller skate wheels stop turning right in the middle of an adventure or when you’re on the rink?

How can you get them to spin again?

This is the right place to find out. These are the facts and tips you need about roller skating.

How Long Can Roller Skate Wheels Last?

Roller skate wheels can last for up to one year, depending on the conditions they are subjected to.

Some roller skates have different designs and functions. It is essential to look after your roller skates. Without them, it’s impossible to enjoy the many activities and commute to work.

How Worn Down Are The Wheels?

Your wheels may have stopped turning because they are old and worn.

If your wheels start to wear, you can change them around to make the difference and get them back on track. You don’t need to buy a new skate yet.

What Kind of Wheels Should I Use?

The wheels’ urethane composition can vary from roller skate to roller skate.

It is difficult to compare them. Listen to the experiences of others. Review and opinion are important.

  • Speed wheels: These are made for speed. Speed wheels are used by most inline skaters. They are used by high-performance skaters. But they do not roll on all surfaces.
  • Derby Wheels: Although they are very similar in speed, their design is quite different.

What is the Cause of Wheels Not Spinning Fast?

1. Too tight on the wheel nuts

If the wheel nuts are too tight, they rub against the bearing. This is when friction happens.

Your bearings and wheels won’t spin quickly because of friction.

Many manufacturers tighten the nuts on roller skate wheels during manufacturing.

Manufacturers place safety first and tighten the wheels to prevent falling off when skating.

2. Surface

It doesn’t matter what surface you choose to roller skate on.

Different wheels are made from different materials and designed to work on certain surfaces.

  • Indoor skating: You will need hard wheels to ensure a smoother ride on smooth surfaces like rinks. Rinks have hard surfaces.
  • Outdoor skating: Softer wheels are required for outdoor skating. They can glide better on uneven or non-smooth surfaces.

3. Age

How many years have you used your wheels?

Do they come from the store, or were they a gift from a relative?

Wheels can wear over time. They become less likely to spin quickly, leading to slower speeds.

Once you find that your roller skate nuts are freeing up on their own, it is time to remove them and place them back.

This should not be done once. Do it several times.

4. Dimensions of the wheel

The wheels’ size has the most significant impact on how fast the skate moves.

Larger wheels spin more quickly, but smaller wheels have more ground. You shouldn’t expect your roller skate wheels to roll very fast if they are smaller.

5. Damage to the wheels

A fifth reason the wheels don’t spin correctly is that there is damage to the bearings and wheels.

Every so often, check the bearings. Replace damaged bearings with original or correct parts if possible.

6. Dirt and debris

If you haven’t yet been inspired to clean out your rollerskates as often and thoroughly as you should be, we hope we can inspire you.

Every time you go skating, dirt gets stuck to the wheels. The wheels will not turn correctly if there is a buildup of dirt or debris.

This can also affect the bearing.

7. Expertise

We all roller skate at different levels. Some people are more skilled than others and can wear down the wheels much faster than someone just learning.

Put your knowledge into the degree, and ensure that you take proper care of it.

Do You Prefer Tightening or Loosening Your Wheels?

Good question indeed.

Is it better to have the wheels loose or tight? It all depends on the rollerskater.

To slow the wheels down, tighten the axle nuts. This creates more friction. You should tighten the nuts enough to allow the wheels to slow down.

But if you loosen them, they will spin faster. Use the correct tools to loosen them.

The First Sign That The Wheels Are Starting to Wear Down

Skaters don’t know that their wheels are worn right below their feet. Uneven wheels can cause problems. When the wheel brushes against the bearing, the wear can affect the speed of your skate.

Slow wheels can be identified by an increase in the size of one wheel relative to the other.

The edges of the wheel begin to wear and will eventually become more worn as you skate on them.

What Is The Best Time to Replace Roller Skates Wheels?

If the wheels of your roller skates are what you use most often on your adventures.

They are the ones that will most likely wear out first. If you notice a split in them, change the wheels immediately.

What Signs Should You Look Out For?

  • Take the wheels off, flip them to one side, then change the front and back. You’ll see that the wheels are smaller but have more wear and tear.
  • The first areas to be worn are the heel and toe of the wheels.
  • Do not let your wheels get too worn before replacing them. Skating on them can be dangerous if they get more spits or scratches.

Pay Attention to The Bearings

If the wheels don’t spin fast enough, it is usually due to the bearings.

Roller skates have many important parts, and the bearings are one of them.

The bearings are found inside the roller skate wheel. These are what make your skates spin and turn.

How to Check The Wheels

  • Turn the wheel until it stops turning.
  • Turn the tool 90 degrees to the left.
  • Can you hear a sound? If there is no noise, then your skate axle is good. The wheel shouldn’t be sliding up and down on the axle.

Types of Bearings

Let’s talk about bearings. If your wheels stop spinning properly, you can fix them.

You can control how fast your wheels turn by choosing the right bearing type. These are the types of bearings.

  • ABEC 1-3 – Barely roll even fresh out of the package.
  • ABEC 3-5 – These bearings don’t last forever
  • ABEC 5-9 – These wheels are the best to roll. These wheels last longer than any other wheel
  • Swiss: Made with special technology that was developed in Switzerland. They last a while but were very expensive.
  • Ceramic: The best wheels available. These are the fastest wheels you will ever see. They are costly but also very delicate.

Bearing Problems

It is important to take care of the bearings of your roller skates just like you would with the wheels.

Your wheels won’t turn due to dirt, dust, or rust on the bearings.

How to Clean Bearings

Step 1: With a skate tool, remove the wheels from your skates.

Step 2: Remove the bearings from the wheels using a bearing instrument. NOTE: Don’t remove your bearings using a sharp metal object. It can cause damage to the casings.

Step 3: Rinse the wheels with warm, soapy hot water. Also, use a clean cloth. Check for any accumulation in the space where bearings usually sit.

Step 4: Use a small pen to remove the plastic covers from the bearings.

Step 5: Put your bearings in a small, sealed container. Make sure you add enough water to completely cover them. Next, shake the container vigorously to get rid of any dirt particles.

Step 6: Drain any remaining water from the bearings. Dry the wheels with a clean towel or cloth. You can also dry them on a paper towel.

Step 7: Let them dry completely before placing them on your roller skate. You should not skate with wet wheels.

Step 8: Add a little bit of bearing lube to each bearing. Check that each bearing is moving freely. If they don’t, it’s time for them to be replaced.

Step 9: Put the bearings back into your wheels, and then put them back on the skates.

Step 10: Have fun roller skating!

Leave a Comment

Your email address will not be published.