We offer bolt on motor mounts to build a High Performance Electric Longboard which you can put on any longboard or skateboard deck.

Our motor mounts allow you to fit a common Remote Control (RC) Motor onto your skateboard/longboard trucks which will be powered by a belt from the motor shaft to the drive wheel.

Can bushings affect ride?

Spend your first few skate sessions either skating on flat ground or basic riding in a mini ramp.

Adjust the trucks after a few days of breaking in the new bushings.

As soon as your board starts to feel normal-no tightness or awkward pulling off to one side-tighten the trucks as you would normally ride them.

See also  How wide should my trucks be longboard?

FAQ

Why do some surfers not use leashes?

One of the main functions of the longboards is that you can ”noseride” on them.

This is riding on the very front of the board.

The correct way to get to the nose is to cross step, and a surf leash can hinder that process.

It is not so much walking up to the nose but the walking back that is the problem.

What is the best size longboard for a beginner?

They minimize stretching and risk of tearing.

Different brands use different sizes of split seams.

Split seams make shorts flexible for MMA workouts.

How should a longboard slide for beginners?

30mph/50kph.

This is a respectably quick speed.

If you’ve hit 30mph, you should pat yourself on the back.

If you’re a DH skater, you can probably hit this speed on most hills with a good longboard tuck.

When can a Husky start pulling?

The main thing to be aware of is that huskies were bred to pull sleighs for hours daily so it’s in their nature to want to pull forward when you’re walking it.

Other possible reasons include being excited to get to where you’re going and being distracted by things going on around it like cars and squirrels.

See also  Does southwest allow skateboards as carry-on?

Should I longboard uphill?

A common one being loose trucks.

Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph.

If you’re going faster than that, then you just might want to tighten your trucks.

What longboard shape is best for tricks?

99% of beginners should start with a cruiser longboard.

If you’re looking for a beginner cruiser board, I’d recommend it being at least 30” long and 8.5” wide.

A long, wide deck will be easier to balance on.

The wheels should be large/soft (60mm-80mm / 77a-83a) so they can easily roll over cracks/bumps.

Will any trucks fit on any skateboard?

Longboard deck and trucks manufacturers use two standards for mount hole patterns, called old school and new school.

You need to ensure your deck and trucks have compatible mount patterns.

Some decks have more than one pattern so you can choose how close or far apart you want to place your trucks.

Is longboarding good exercise?

Longboards are easier to learn the basics, but skateboards are easier to learn tricks.

With the larger wheels and board, longboards have more stability.

This requires less balance for the rider, making them ideal for beginners.

See also  Can you duck dive a big wave?

Do you push with your front or back foot?

Long-distance pushing.

What is this? Report Ad.

In this longboarding style, you kick push your skate across miles of roadways – E.g…188 miles at the Chief Ladiga Comet Skate Challenge, or nearly 300 miles at the Ultraskate long-distance push European event.

How do you practice carving on a longboard?

What Is Carving on a Skateboard? Carving on a skateboard is the act of making big, fast turns in the corners of transitions.

On flat surfaces, carving is easiest on a longboard or carving board, but with practice, you can learn to carve a bowl on a shortboard.

Is longboarding good exercise?

You can pawn your skateboard for cash by selling it to pawn shops like Sportsmans Pawn.

Pawn Shops are used for people to sell or ”recycle” their old valuables and collectibles.

You can give your item to a pawnbroker and they will give you cashback for it.

You may wonder how to get a good deal at a pawnshop.

Do you need spacers for bearings longboard?

What parts do you need to build a longboard?

How do you make a homemade longboard?

Most decks will be around 1/2″ thick, differentiating by design and material.

Carving boards can be made with different materials including maple and bamboo.

Author

My name is Patricia Toh. I was born in the southen of China but I live in Hawaii. I work as a translator. I love skating. But in the future, I’d like to try yoga too."

Write A Comment