CJ: For starters, speed wobs can be caused by a number of different reasons.
A common one being loose trucks.
Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph.
If you’re going faster than that, then you just might want to tighten your trucks.
How loose should your trucks be on a longboard?
FAQ
Can you grease longboard bearings?
Soaking your wheels in a bucket or clogged sink with some dawn dishwashing soap while you take each one off and remove the bearings, will help get things rolling while you work.
Make sure the bearings are out of the wheels so the soap can start dissolving the gunk laying in the bearing beds.
Can you dance on a 40 inch longboard?
The Shape.
Like I said, longboards are usually much longer than skateboards.
They are on average 33-60 inches long and 9-10 inches wide, while skateboards are 28-32 inches long and 7-10 inches wide.
Why do people like to longboard?
Longboarding has two main purposes – cruising and transportation.
Its design is pure perfection when it comes to street riding.
Its shape, flexible truck and soft wheels make it comfortable and easy to maneuver even on a rougher surface.
And, a longboard is amazing even for longer trips.
Are long boards easier?
It’s a fair question to ask as a beginner: are longboards easier to ride? The short answer is, yes!
Longboards, especially long, wide boards and decks that are considered drop-through.
The drop-through will lower your center of gravity.
How long do longboard bearings last?
For most linear guide and drive applications, grease is the better lubrication option.
It adheres to bearing surfaces better than oil, lasts longer, and is less likely to run off or be ejected from rotating parts.
What can be used as skateboard lube?
Cleaning your bearings So…you grab a bottle of WD40 without realizing that it will dry your bearings.
It may shrug off grime, but you’ll ruin these parts sooner.
How fast can you go on a longboard?
Can you put brakes on a longboard?
Foot braking is an essential skill for downhill skateboarders.
Foot braking is a technique where you lightly touch your back foot to the ground to generate friction with the pavement, helping you slow down to a stop.
The controlled slide is the most effective way to control your speed when going downhill.
Can longboards be used in skateparks?
Skateboarding at night can be riskier than in daylight (though not always).
The risks associated with nighttime skating are related to insufficient lighting, which can lead you to trip over cracks, bumps, or high curbs.
Lighting is a key aspect of night skateboarding.
How many layers of plywood do you need for a longboard?
The deck style of a longboard play a key role in how stable the board is, how easy it is to foot-brake, and how easy it is to push on flat ground.
Can I bring a longboard on Southwest Airlines?
Skateboards should be inside a bag.
There are corresponding charges based on cabin and travel region.
For example, main cabin travelers on US flights will pay $30 for their first checked bag.
Skateboards over 50lbs shall have additional fees.
Can you take a longboard to a skatepark?
99% of beginners should start with a cruiser longboard.
If you’re looking for a beginner cruiser board, I’d recommend it being at least 30” long and 8.5” wide.
A long, wide deck will be easier to balance on.
The wheels should be large/soft (60mm-80mm / 77a-83a) so they can easily roll over cracks/bumps.
How do you measure the wheelbase of a skateboard?
For stability while cruising, medium tightness is preferable.
This should keep the trucks loose enough for turning.
However…tighten the trucks if you tend to skate downhill or plan to do some practice rides on a steep slope or ramp.
Does Big Wave beer expire?
Each 12 ounce serving has 4.6% alcohol by volume and 134 calories.
Grab a six pack of beer bottles anytime you need refreshing drinks to pair with your easy-going hang time!
Longboard Island Lager pairs well with lighter fare, but has enough flavor and body to stand up to heartier foods, too.
